Scroll to top
© 2023 , TRIA, S.A.
Share
en pt
Back
Smoke Curtains

SMOKE CURTAIN
BACHSMOKE H

Scroll

Description

BACHSMOKE H is a horizontal automatic smoke curtain with DA and DH 120
classification that, in case of a fire, limits and controls the smoke.
The curtain is made from fiberglass fabric, with polyurethane coating on both
sides, seamed with reinforced steel wire, and fixed to two steel rollers of 78 mm
in diameter. It also includes galvanized steel elements such as headbox, side
guides, and bottom bar.
All the system is driven by two 24 V tubular motors, on opposite sides. The control
panel for automatic curtains (CBM) has a nominal input voltage of 115 V or 220
V and an output voltage of 24 V.
A UPS System (Uninterruptible Power Supply) with an autonomy of up to 6
hours in all control panels.
Tested and approved according to the European Standard UNE EN 12101-1 and
with CE mark.

Operation

The system can be activated by a SHEV, fire alarm contact, internal fire and smoke detection devices, or manual emergency buttons. In the event of a fire, the BACH’s Control Panel (CBM), receives the signal alarm, and the automatic curtain deploys automatically, at constant speed. If there is a false alarm the curtains return to stand-by position automatically after reset of alarm from main Fire Management Systems.  In case of main power loss, the curtain will remain fully retracted thanks to BACH’s battery back-up system.

Fabric

The fiberglass fabric resists up to 600ºC. The polyurethane coating on both sides guarantees mechanical stability when handling the fabric not only in the sewing process but also during the installation. All seams are done with reinforced stainless steel wires with a coating of Kevlar.

Headbox

Galvanized Steel head-box 1,2mm thickness with different possibilities to adapt to different architectural spaces, and maintenance requirements.
Dimensions of the head-box varies depending on width and height of the curtain.

Side Guides

Galvanized Steel of 1,5mm thickness and 78mm diameter. Special slide system for fixing the fabric.

Roller

Galvanized Steel from 1,5 to 3mm thickness and different dimensions depending on width and height of the curtain.

Bottom Bar

Galvanized Steel of 1,5mm thickness.

Electric Motor

BACH tubular motor 24Vdcc
Maximum power 24 W/18,5Nm
Maximum current 3 A
Average linear speed 0.08 m/s

CRM Caixa de Regulação de Motor

Polyester box IP56 with an electronic board inside to control the movement of
the motor.
Dimensions (W x H x D) 120mm x 160mm x 75mm

CBM Control Panel

Receives the signal alarm from Fire Management System and controls the movement of curtains. Visual and acoustic alert system.

Dimensions (W x H x D) from 300 x 300 x 210 mm to 400 x 400 x 210 mm
Input 115 or 220 Vac 50Hz
Output 24Vcc
Battery 2 x 12Vcc 7,5 Ah rechargeable (up to 6 hours autonomy)
Maximum capacity up to 12 motors.

Optional Extras

RAL coating head-box, side guides, bottom bar, screws, rivets.
Stainless steel elements head-box, side guides, bottom bar, screws, rivets.
Headbox customized set-up for specific architectural or special operational
requirements.
Side guides customized set-up for specific architectural or special operational
requirements.
Electric motor special 24Vdc motors up to 80 Nm without CRM, special 230Vac
motors up to 120Nm without CRM.
CBM control panel special designs up to 48 motors in one control panel, additional
information output, micro switches, communication with other devices,
special battery backup, possibility of delaying curtain deployment.

Note: other requirements and customized solutions on demand.